APC SMT3000RMJ2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)1

APC SMT3000RMJ2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)2

APC SMT3000RMJ2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)3

APC by Schneider Electric Smart-UPS 3000VA RM 2U LCD 100V4

APC by Schneider Electric Smart-UPS 3000VA RM 2U LCD 100V5

APC SMT3000RMJ2U uninterruptible power supply (UPS) 3 kVA 2700 W 8 AC outlet(s)

APC SMT3000RMJ2U. Output power capacity: 3 kVA, Output power: 2700 W, Input operation voltage (min): 100 V. AC outlet types: NEMA 5–15R,NEMA 5–20R, Power plug: NEMA L5-30P, AC outlets quantity: 8 AC outlet(s). Typical backup time at full load: 2 min, Typical backup time at half load: 8 min, Battery recharge time: 4 h. Form factor: Rackmount, Product color: Black, Rack capacity: 2U. Width: 17" (432 mm), Depth: 26" (661 mm), Height: 3.39" (86 mm)

Manufacturers: Schneider Electric SA , APC

SKU: APWSMT3000RMJ2U

Manufacturer part number: SMT3000RMJ2U

Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter Provides actual kilowatt hours of usage for energy conscious users.
Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Sequenced shutdown and restart Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).
Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Sine wave output Eliminates humming and heat generated when powering tubelights and fans.
StruxureWare Central compatible Enables centralized management via StruxureWare Central.
Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms Provides notification of changing utility power and UPS conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) USB connectivity Provides management of the UPS via a USB port (not available on all models).
Serial Connectivity Provides management of the UPS via a serial port.
Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Network manageable Provides remote management of the UPS over the network.
Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.

Overview
Specifications
Contact Us

Products specifications

Attribute name	Attribute value
Width	17"
Depth	26"
Height	3.39"
Weight	97 lbs
Battery Recharge Time	4 h
Emergency Power Off (EPO)	Y
Input Frequency	50/60 Hz
Cable Length	96.1"
Display Type	LCD
Features
Input operation voltage (max)	100 V
Output operation voltage (max)	100 V
Efficiency	97.6 %
Rack capacity	2U
LED indicators	Battery replacement
Output power	2700 W
Noise level	55 dB
Audible alarm(s)	Y
Surge energy rating	459 J
Input operation voltage (min)	100 V
Output operation voltage (min)	100 V
Design
Certification	UL, VCCI
Form factor	Rackmount
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95 %
Storage relative humidity (H-H)	0 - 95 %
Operating altitude	0 - 118110.2"
Non-operating altitude	0 - 590551.2"
Ports & interfaces
AC outlets quantity	8 AC outlet(s)
AC outlet types	NEMA 5–15R,NEMA 5–20R
USB 2.0 ports quantity	1
Power plug	NEMA L5-30P
Technical details
Product color	Black
Sustainability certificates	RoHS
Power
Maximum current	24 A
Output power capacity	3 kVA
Other features
Package dimensions (WxDxH)	23.6 x 38.6 x 10"
Packaging data
Package weight	114.6 lbs
Battery
Typical backup time at full load	2 min
Typical backup time at half load	8 min

Your name *

Your email *

Enquiry *

Products specifications

Attribute name	Attribute value
Width	17"
Depth	26"
Height	3.39"
Weight	97 lbs
Battery Recharge Time	4 h
Emergency Power Off (EPO)	Y
Input Frequency	50/60 Hz
Cable Length	96.1"
Display Type	LCD
Features
Input operation voltage (max)	100 V
Output operation voltage (max)	100 V
Efficiency	97.6 %
Rack capacity	2U
LED indicators	Battery replacement
Output power	2700 W
Noise level	55 dB
Audible alarm(s)	Y
Surge energy rating	459 J
Input operation voltage (min)	100 V
Output operation voltage (min)	100 V
Design
Certification	UL, VCCI
Form factor	Rackmount
Operational conditions
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95 %
Storage relative humidity (H-H)	0 - 95 %
Operating altitude	0 - 118110.2"
Non-operating altitude	0 - 590551.2"
Ports & interfaces
AC outlets quantity	8 AC outlet(s)
AC outlet types	NEMA 5–15R,NEMA 5–20R
USB 2.0 ports quantity	1
Power plug	NEMA L5-30P
Technical details
Product color	Black
Sustainability certificates	RoHS
Power
Maximum current	24 A
Output power capacity	3 kVA
Other features
Package dimensions (WxDxH)	23.6 x 38.6 x 10"
Packaging data
Package weight	114.6 lbs
Battery
Typical backup time at full load	2 min
Typical backup time at half load	8 min

Product tags

(81422)