The SS2GR26i is a fully featured Gigabit Layer 2/4 switch that is ideal for deployment both at the core and the network edge to provide full gigabit speeds throughout the network. With 24 gigabit copper ports, and 4 dual-interface combo ports that support both copper and fiber connections, the switch allows for multiple gigabit connections to the network core.
Comprehensive QoS, feature rich VLAN functions (Voice VLAN, Q in Q, VLAN VPN, etc),enhanced security, classified bandwidth control, link aggregation, this switch has all of the features you could ask for, and is also easy to configure and manage through single IP management (up to 24 units, also work with layer 3 10G switches from Amer.com) and industrial standard CLI shell and Web GUI.
Products specifications
| Attribute name | Attribute value |
|---|
| SFP/SFP+ slots quantity | 4 |
| Width | 17.3" |
| Depth | 16.3" |
| Height | 1.69" |
| Switch Type | Managed |
| Switching capacity | 52 Gbit/s |
| Number of VLANs | 4000 |
| Combo SFP ports quantity | 4 |
| Number of queues | 8 |
| Stackable | Yes |
| Port mirroring | Yes |
| DHCP features | DHCP server, DHCP client |
| Link aggregation | Yes |
| IGMP snooping | Yes |
| LED indicators | Yes |
| Certification | FCC A, CE A, VCCI-A |
| Operating temperature (T-T) | 32 - 104 °F |
| Operating relative humidity (H-H) | 10 - 90 % |
| Basic switching RJ-45 Ethernet ports quantity | 22 |
| Gigabit Ethernet (copper) ports quantity | 22 |
| Console port | RJ-45 |
| Maximum data transfer rate | 1 Gbit/s |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3z |
| Firmware upgradeable | Yes |
| Multicast support | Yes |
| Copper ethernet cabling technology | 100BASE-TX, 10BASE-T |
| 10G support | No |
| Quality of Service (QoS) support | Yes |
| VLAN support | Yes |
| Spanning tree protocol | Yes |
| System event log | Yes |
| Power over Ethernet (PoE) | No |
| Switch layer | L2 |
| Web-based management | Yes |
| Product color | Gray |
| Power consumption (typical) | 60 W |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 100 - 240 V |
| MAC address table | 8000 entries |
| Power LED | Yes |
| Rack mounting | Yes |
| Management protocols | HTTP, RMON, SNMP v1/v2c/v3, Telnet |
| Supported data transfer rates | 10, 100,1000Mbps |