The Cisco Small Form-Factor Pluggable (SFP) Ethernet-to-T3 Remote Bridge forwards Gigabit Ethernet packets to a WAN based on time-division multiplexing (TDM) at full-duplex T3 wire speed, fully using the expensive T3 TDM bandwidth to take advantage of existing DS3 linkage to provide an end-to-end Radio Access Network (RAN) backhaul solution.
Products specifications
| Attribute name | Attribute value |
|---|
| SFP module slots quantity | 20 |
| SFP/SFP+ slots quantity | 20 |
| Electromagnetic compatibility | FCC 15 A, ICES-003 A, VCCI A, EN55022 A, CISPR22 A, AS/NZS3548 A, EN61000-3-2, EN61000-3-3, EN61000-3-1, EN55024, EN50082-1, EN300 386, AS/NZS CISPR 22 A, EN61000-6-1 |
| Forwarding rate | 48 Mpps |
| Queues per port | 3200 |
| Buffer size per port | 512 MB |
| Weight | 11.7 lbs |
| Switching capacity | 20 Gbit/s |
| Access Control List (ACL) | Y |
| Safety | UL 60950, CSA C22.2 No. 60950, EN60950, TS001, IEC 60950, AS/NZS3260 |
| Bandwidth | 20 Gbit/s |
| Certification | GR-499-CORE, T1.107, T1.404, G.703, G.704, G.775, G.824, CE |
| Storage temperature (T-T) | -40 - 78 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Operating altitude | -2362.2 - 78740.2" |
| Dimensions (WxDxH) | 15.4 x 16 x 1.73" |
| Networking standards | IEEE 802.1Q, IEEE 802.1s, IEEE 802.3ad |
| Fiber ports quantity | 20 |
| Fiber optic connector | SFP |
| Ethernet interface type | Gigabit Ethernet |
| Ethernet LAN data rates | 1000 Mbit/s |
| Quality of Service (QoS) support | Y |
| Management platform | CiscoWorks, CiscoView, CiscoWorks Resource Manager Essentials (RME), Cisco ANA, Cisco VAMS |
| Power consumption (typical) | 277 W |
| MAC address table | 96000 entries |
| Fiber ethernet cabling technology | 1000BASE-X |